- Nokia 3360
- >
- User Guide
- >
- 23 Reference information
- >
- . Batteries
- >
- Charging times
Nokia 3360 - Charging times
Nokia 3360 > Charging times
- Nokia 3360
- User Guide
- Notes
- Where to get information
- 1 Safety first
- 2 Welcome
- . Get the most out of this guide
- . Understand wireless network services
- . Register your phone
- . E-newsletters
- . Learn about accessibility solutions
- Alternate format user guides
- LPS-3 Mobile Inductive Loopset
- Set up the TTY/TDD profile
- 1 Connect the TTY/TDD via cable to the HDA-9 adapter.
- 2 Plug the HDA-9 adapter into the connector on the bottom of your phone, as shown in the illustration.
- 3 Press Menu 4-4-4-1 (Settings > Accessory settings > TTY/TDD > Use TTY).
- 4 Scroll to Yes, then press Select.
- notes about TTY/TDD calls
- make a TTY/TDD call
- Receive a TTY/TDD call
- end a TTY/TDD call
- Accessible features
- . Your phone’s label
- . Contact Nokia
- . Contact your service provider
- 3 Set up your phone
- . Install the battery
- 1 Push in the release button on the back of the phone (1), slide the cover toward the top of the phone (2 and 3), remove the cover.
- 2 Place the battery in the compartment with the label side facing up and the golden contact area aligned with the contact prongs.
- 3 Slide the battery into place and snap the top of the battery in so that the bar comes down snugly next to the battery.
- 4 Replace the cover (1) and slide it until you hear a click (2).
- . Charge the battery
- . Remove the battery
- . Important battery information
- . Prolong battery life
- . Switch on your phone
- . Set up your headset
- . Use the carrying case
- . Adjust the volume
- . Adjust screen contrast
- . Install the battery
- 4 Review the basics
- . Your Nokia 3360 phone
- . About the antenna
- . Memory use
- . Learn the keys
- . Make and answer calls
- . Check the Start screen
- . Review phone symbols
- . Use the selection keys
- . Check in-phone help
- . Browse phone menus
- . Shortcuts
- . Phone book menu
- 5 Add information
- . About entering letters and numbers
- . ABC and 123 methods
- . Write with predictive text
- 6 Store names and numbers
- . Open the phone book
- . Save names and numbers
- . Save a text entry with a name
- . Recall information
- . Use phone book menus
- . Edit a name or number
- . Erase stored names and numbers
- 1 Recall the phone book entry you want to erase.
- 2 Press Details, then press Options.
- 3 Scroll to Erase, and press Select.
- 4 Press OK.
- 1 Press Names, scroll to Erase, and press Select.
- 2 Scroll to One by one and press Select.
- 3 Scroll to the entry you want to delete and press Erase.
- 4 When the message Erase all details? appears, press OK.
- . Erase the entire phone book
- . Add a second number to a name
- . Check memory status
- 7 Check call history
- . Check missed, received, or dialed calls
- 1 Press Menu 2 (Menu > Call log) to go to the call log, then press Select.
- 2 Use and to move to Missed calls, Received calls, or Dialed calls.
- 3 Press Select at the submenu you want.
- 4 Use and to scroll to the number or name you want, then press Options.
- 5 Scroll to the option you want, then press Select.
- Missed calls
- Dialed calls, received calls
- . Clear call lists
- . Check call timers
- . Turn on a current call timer
- . Clear call timers
- . Check missed, received, or dialed calls
- 8 Use advanced calling features
- . Set in-call options
- . Use call waiting
- . Use call forwarding
- Learn about call forwarding feature codes
- Store the call forwarding feature code
- 1 Press Menu 4-6-2 (Menu > Settings > Network services > Network feature setting). The Feature code box appears.
- 2 Enter the feature code your service provider gave you, then press OK.
- 3 Use or to scroll to Call forwarding and press Select.
- 4 Scroll to the type of forwarding that matches the feature code you entered, then press Select.
- 5 Make sure that Activate is highlighted and press Select.
- Activate/cancel call forwarding
- 1 Press Menu 4-6-3 (Menu > Settings > Network services > Call forwarding).
- 2 Scroll to the desired call forwarding option, then press Select.
- 3 Highlight Activate and press Select.
- 4 In the Number box, either enter the number to which you want your calls forwarded (or press Find to recall a number from the phone book).
- 5 Press OK.
- . Redial automatically
- . Use a calling card
- Save calling card information (step 1)
- 1 Press Menu 4-2-2 (Menu > Settings > Call settings > Calling card).
- 2 Enter your security code and press OK.
- 3 Scroll to card A, B, C or D and press Options.
- 4 Scroll to Edit and press OK. At Dialing sequence, press Select.
- 5 Use or to scroll through the list of dialing sequences, as described in the following list.
- 6 Press Select.
- Save calling card information (step 2)
- 1 When prompted for the calling card’s access number, enter the number and press OK. This number is usually the 1-800 number that is listed on the calling card.
- 2 When prompted to enter a calling card number and PIN number, enter the number, and press OK. Press OK again when the Save changes? message appears.
- 3 Use or to scroll to Card name, press Select, and enter the card name using your phone’s keypad.
- 4 Press OK.
- Choose a calling card to use
- Make a calling card call
- 1 Enter the phone number, including any prefix (such as 0 or 1) that may be needed.
- 2 Press and hold until your phone displays the message Card call and then Wait for tone, then press OK.
- 3 When you hear the tone from your calling card service, press OK.
- 4 After the tone, your phone displays the message Wait for tone, press OK again. Press OK.
- Save calling card information (step 1)
- . Send your own number in caller ID
- . Select a phone number
- . Set touch tones
- Set manual touch tones
- Set touch tone length
- Store touch tone sequences (strings)
- Store touch tone strings with phone numbers
- Send a touch tone string
- 1 Press Menu 4-3-2-1 (Menu > Settings > Phone settings > Touch tones > Manual touch tones).
- 2 Make sure that the setting is not set to Off.
- 3 Then, during your call, press Options, scroll to Touch tones and press Select.
- 4 Enter the touch tone string or recall the string from the phone book, and press Tones.
- 9 Use voice mail
- 10 Personalize rings and tones
- . What is a profile?
- . Select a different profile
- . Customize a profile
- 1 Press Menu 3 (Menu > Profiles).
- 2 Scroll to the desired profile in the list and press Select.
- 3 Select Customize to view the options for the selected profile.
- Set ringing options
- 1 Press Menu 3 (Menu > Profiles).
- 2 Use or to scroll to the desired profile in the list for which you want to set the ringing options, and press Select.
- 3 Scroll to Customize and press Select.
- 4 Scroll to Ringing options and press Select.
- 5 Scroll to one of the ringing options, as described below, and press Select.
- Set the ringing tone
- 1 Press Menu 3 (Menu > Profiles). Your phone lists each profile.
- 2 Use or to scroll to the profile for which you want to set the ringing tone.
- 3 Press Select.
- 4 Scroll to Customize and press Select.
- 5 Scroll to Ringing tone and press Select.
- 6 Scroll through the options, and when you hear the tone you want to use, press Select.
- Set the ringing volume
- Set a vibrating alert
- Set the message alert tone
- 1 Press Menu 3 (Menu > Profiles).
- 2 Use or to scroll to the profile for which you want to set the message alert tone, and press Select.
- 3 Select Customize and press Select.
- 4 Scroll to Message alert tone, then press Select.
- 5 Use or to scroll through your choices.
- 6 When you find the tone you want, press Select.
- Set keypad tones
- 1 Press Menu 3 (Menu > Profiles).
- 2 Use or to scroll to the profile for which you want to set the keypad tones, and press Select.
- 3 Select Customize and press Select.
- 4 Scroll to Keypad tones and press Select.
- 5 Use or to scroll to one of the levels and press Select. If you choose Off, no keypad tones are heard.
- Set warning tones
- . Rename profiles
- 11 Personalize phone settings
- . Set the language
- . Set and display the clock
- Set the clock
- 1 Press Menu 4-1-2 (Menu > Settings > Time settings > Clock).
- 2 Use or to scroll to Set the time and press Select.
- 3 Enter the time using a 00:00 format and press OK. For example, to set your clock to 9:30, enter 09:30. If you set the time format for 24-hour time, enter the number the same way: 09:30 or 21:30.
- Show the clock on the Start screen
- Select the time format
- Set the clock
- . Set the clock to be updated by the network
- . Add a welcome note
- . Use speed dialing
- Set up a speed-dial key
- 1 Press Names and scroll to 1-touch dialing.
- 2 Press Select.
- 3 Use or to scroll to the first number that includes the message (empty) and press Assign.
- 4 Use or to scroll to the name and number to which you want to assign this key and press Select.
- 5 To call a number using speed dialing, press and hold the appropriate key for a few seconds.
- Change speed dialing numbers
- Erase speed dialing numbers
- Set up a speed-dial key
- . Set your phone to answer automatically
- . Set the lights (car kit only)
- . Restore the factory settings
- 12 Manage phone security
- Tips
- . Change your security code
- 1 Press Menu 4-5-2-1 (Menu > Settings > Security settings > Access codes > Change security code). The Security code box appears.
- 2 Enter the default security code and press OK.
- 3 At the message Enter new security code, enter your new security code and press OK.
- 4 At the message Verify new security code, enter your new security code again and press OK. The message Security code changed appears.
- . Lock the keypad
- . Restrict calls
- Add a number to the call restriction list
- 1 Press Menu 4-5-1 (Menu > Settings > Security settings > Call restrictions).
- 2 Press Select, enter your security code, and press OK.
- 3 Scroll to Restrict outgoing calls or Restrict incoming calls, then press Select.
- 4 Scroll to Add restriction, then press Select.
- 5 Enter the number you want to restrict, or recall the number from the phone book, then press OK.
- 6 Enter a name for the restriction, then press OK. If you press OK without entering a name, the number will be used.
- Restrict outgoing calls
- 1 Press Menu 4-5-1 (Menu > Settings > Security settings > Call restrictions).
- 2 Press Select, enter your security code, and press OK.
- 3 Scroll to Restrict outgoing calls and press Select.
- 4 Scroll to Select to choose from your list of call restrictions.
- 5 Scroll to the restriction you want to activate and press Mark.
- 6 Press Done. The message Save changes? appears. Press Yes.
- Restrict incoming calls
- 1 Press Menu 4-5-1 (Menu > Settings > Security settings > Call restrictions).
- 2 Press Select, enter your security code, and press OK.
- 3 Scroll to Restrict incoming calls, then press Select.
- 4 Scroll to Select and press Select to choose from your list of call restrictions.
- 5 Scroll to the restriction you want to activate and press Mark.
- 6 Press Done. The message Save changes? appears. Press Yes.
- Turn off call restrictions
- Add a number to the call restriction list
- 13 Manage reminders and notes
- . Add a reminder
- 1 Press Menu 8 (Menu > Reminders), then press Options.
- 2 Scroll to Add reminder and press Select.
- 3 Enter the subject for the reminder and press Options. The following options are available:
- 4 Highlight Save and press Select.
- 5 Enter the date and press OK, then enter the time and press OK.
- 6 Next, you have the option to set an alarm for your reminder.
- . Add a note
- . Send and receive a reminder or note
- Send a reminder or note
- 1 Press Menu, scroll to Reminders, and press Select.
- 2 Scroll through your list of reminders and notes, highlight the one you want to send, and press Options.
- 3 Scroll to Send, then press Select.
- 4 Select the method you would like to use, then follow the phone’s prompts to send the reminder or note.
- Receive a reminder or note
- Send a reminder or note
- . Choose other reminder and note options
- . Add a reminder
- 14 Use prepaid services
- . Manage prepaid service
- . Save your access numbers
- 1 Press Menu 11-3 (Menu > Prepaid > Save access phone numbers).
- 2 At Save access phone numbers, press Select.
- 3 Scroll to Replenish phone number, press Select, enter the access number from your service provider, and press OK.
- 4 Scroll to Balance phone number, enter the balance number from your service provider, and press OK.
- . Add money to your account
- . Check your prepaid balance
- 15 Set network services features
- 16 Communicate with text messages
- . About text messages
- . Use folders for text messages
- . Write and send a text message
- . Resend a message from the outbox
- . Receive a text message
- . Read a text message
- . Save a message in the archive folder
- . When your phone’s memory is full
- . Erase messages
- . Reply to a message
- . Forward a message
- 1 While reading a message in the inbox, press Options.
- 2 Scroll to Forward, press Select, and choose whether your message should be sent as a text message or as e-mail.
- 3 Press Options, or edit the message and press Options.
- 4 Scroll to Send, then press Select.
- 5 Enter or recall the recipient’s phone number, then press OK.
- . Send and receive e-mail messages
- Send an e-mail message
- Reply to or forward an e-mail message
- 1 If the message is not on the screen, press Menu 01-4 (Menu > Message > Inbox).
- 2 Select the message you received and press Select.
- 3 Press Options, scroll to Forward or Reply, and press Select.
- 4 Scroll to As e-mail and press Select.
- 5 Select the format.
- 6 Follow steps 3 through 6 in “Send an e-mail message.”
- Receive an e-mail message
- . Use templates
- . Chat with other phone users
- Start a chat session
- 1 Press Menu 01-3 (Menu > Messages > Chat), then press Select.
- 2 Enter the other party’s phone number or recall it from the phone book and press OK.
- 3 At My chat name: enter a name for the chat session and press OK.
- 4 Write your chat message, press Options, then press Send.
- 5 Press OK to clear the screen and reply to the message.
- 6 To view the previous message or edit your chat name, press Options and select Chat history or Chat name.
- Start a chat session
- . Use picture messages
- Notes about picture messages
- Send picture messages
- Attach a picture to a text message
- 1 Press Menu 01-1 (Menu > Messages > Write message).
- 2 Enter your message, then press Options.
- 3 Scroll to Attach picture, then press Select.
- 4 Scroll to the picture you want to send, then press View.
- 5 Press Use to attach the picture to your text message.
- 6 Press Options, then select Send.
- 7 Enter the phone number or recall a number from your phone book, then press OK.
- Preview, change, or erase a picture message
- 1 After a picture has been attached to your text message, press Options at the message edit screen.
- 2 Scroll to one of the following options and press Select.
- a) Preview - Previews the attached message before sending. Press Back to exit.
- b) Change picture - Takes you back to the picture list. Scroll to highlight a new picture. Press View then press Use to link the new picture to your message.
- c) Delete picture - Deletes the attached picture from your text message.
- Receive picture messages
- 17 Use special features
- . Send and receive business cards
- Send a business card
- 1 Find the name in your phone book and press Details.
- 2 Press Options, scroll to Send bus. card, then press Select.
- 3 Scroll to SMS and press Select. (SMS stands for short message service.)
- 4 Choose Primary no. or All details, then press Select. This step appears only if you have two numbers saved with the name or if you have a text entry.
- 5 Enter or recall the phone number to which you want to send the business card, and press OK.
- View a received business card
- Save a viewed business card
- Delete a viewed business card
- Send a business card
- . Download (transfer) ringing tones
- . Set the alarm clock
- . Use the calculator
- 1 Press Menu 7 (Menu > Calculator).
- 2 Enter the first number in the calculation.
- 3 Based on the type of calculation that you need to perform, use one of the following actions:
- 4 Enter the second number in the calculation.
- 5 Press Options, use or to scroll to Equals, and press Select.
- Convert currency
- . Send and receive business cards
- 18 Infrared
- . Infrared basics
- 1 Make sure that the IR ports of the two devices are pointed at each other.
- 2 Press Menu 9 (Menu > Infrared), then press Select. You see the message IR reception activated, and the IR icon appears.
- 3 Have the user of the sending device select the desired IR function to start data transfer.
- Check the status of an IR connection
- . Send and receive information
- . PC Connectivity
- . Infrared basics
- 19 Connect to the Wireless Internet
- . Notes on Wireless Internet access
- . Set up for browsing
- . Sign on to the Wireless Internet
- . Use browser options (Services Menu)
- . Sign off the Wireless Internet
- . Navigate the Wireless Internet
- . Use bookmarks
- 20 Play games
- 21 Frequently asked questions (FAQ)
- 22 Glossary
- 23 Reference information
- . Battery statements
- . Use proper care and maintenance
- . Understand important safety information
- . Emergency calls
- 1 If the phone is not on, switch it on. Check for adequate signal strength.
- 2 Press as many times as needed (for example, to exit a call, to exit a menu, etc.) to clear the display and ready the phone for calls.
- 3 Key in the emergency number for your present location (for example, 911 or other official emergency number). Emergency numbers vary by location.
- 4 Press the key.
- . Certification Information (SAR)
- . Use accessories safely
- . Batteries
- . Accessories
- 900 mAh NiMH Battery (BMC-3)
- Rapid Travel Charger (ACP-8U)
- Rapid Cigarette Lighter Charger (LCH-9)
- Spare Battery Charger (DDC-1)
- Desktop Charging Stand (DCV-10)
- Headset (HDE-2)
- Loopset (LPS-3)
- Leather carry case (CSL-20)
- TTY/TDD Adapter (HDA-9)
- Mobile Holder (MBC-6)
- Express Car Kit (CARK-125)
- Express Car Kit (PPH-1)
- Nokia Xpress-on™ color covers
- . Technical information
- . Troubleshooting
- . Nokia ONE-YEAR LIMITED WARRANTY
- 1 The limited warranty for the Product extends for ONE (1) year beginning on the date of the purchase of the Product. This one year period is extended by each whole day that the Product is out of your possession for repair under this warranty.
- 2 The limited warranty extends only to the original purchaser (“Consumer”) of the Product and is not assignable or transferable to any subsequent purchaser/end-user.
- 3 The limited warranty extends only to Consumers who purchase the Product in the United States of America.
- 4 During the limited warranty period, Nokia will repair, or replace, at Nokia’s sole option, any defective parts, or any parts t
- 5 Upon request from Nokia, the Consumer must prove the date of the original purchase of the Product by a dated bill of sale or dated itemized receipt.
- 6 The Consumer shall bear the cost of shipping the Product to Nokia in Melbourne, Florida. Nokia shall bear the cost of shipping the Product back to the Consumer after the completion of service under this limited warranty.
- 7 The Consumer shall have no coverage or benefits under this limited warranty if any of the following conditions are applicable:
- a) The Product has been subjected to abnormal use, abnormal conditions, improper storage, exposure to moisture or dampness, unau
- b) The Product has been damaged from external causes such as collision with an object, or from fire, flooding, sand, dirt, winds
- c) Nokia was not advised in writing by the Consumer of the alleged defect or malfunction of the Product within fourteen (14) days after the expiration of the applicable limited warranty period.
- d) The Product serial number plate or the accessory data code has been removed, defaced or altered.
- e) The defect or damage was caused by the defective function of the cellular system or by inadequate signal reception by the external antenna, or viruses or other software problems introduced into the Product.
- 8 Nokia does not warrant uninterrupted or error-free operation of the Product. If a problem develops during the limited warranty period, the Consumer shall take the following step-by-step procedure:
- a) The Consumer shall return the Product to the place of purchase for repair or replacement processing.
- b) If “a” is not convenient because of distance (more than 50 miles) or for other good cause, the Consumer shall ship the Product prepaid and insured to: Nokia Inc., Attn: Repair Department 795 West Nasa Blvd. Melbourne, FL 32901
- c) The Consumer shall include a return address, daytime phone number and/or fax number, complete description of the problem, pro
- d) The Consumer will be billed for any parts or labor charges not covered by this limited warranty. The Consumer will be responsible for any expenses related to reinstallation of the Product.
- e) Nokia will repair the Product under the limited warranty within 30 days after receipt of the Product. If Nokia cannot perform
- f) If the Product is returned during the limited warranty period, but the problem with the Product is not covered under the term
- 9 You (the Consumer) understand that the product may consist of refurbished equipment that contains used components, some of which have been reprocessed. The used components comply with Product performance and reliability specifications.
- 10 ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION OF THE
- 11 Some states do not allow limitation of how long an implied warranty lasts, so the one year warranty limitation may not apply
- 12 Nokia neither assumes nor authorizes any authorized service center or any other person or entity to assume for it any other o
- 13 This is the entire warranty between Nokia and the Consumer, and supersedes all prior and contemporaneous agreements or unders
- 14 This limited warranty allocates the risk of failure of the Product between the Consumer and Nokia. The allocation is recognized by the Consumer and is reflected in the purchase price.
- 15 Any action or lawsuit for breach of warranty must be commenced within eighteen (18) months following purchase of the Product.
- 16 Questions concerning this limited warranty may be directed to: Nokia Inc. Attn: Customer Service 7725 Woodland Center Blvd.,
- 17 The limited warranty period for Nokia supplied attachments and accessories is specifically defined within their own warranty cards and packaging.
- Appendix A Message from the CTIA (Cellular Telecommunications & Internet Association) to all users of mobile phones.
- A Guide to Safe and Responsible Wireless Phone Use
- 1 Get to know your wireless phone and its features such as speed dial and redial. Carefully read your instruction manual and lea
- 2 When available, use a hands free device. A number of hands free wireless phone accessories are readily available today. Whethe
- 3 Position your wireless phone within easy reach. Make sure you place your wireless phone within easy reach and where you can gr
- 4 Suspend conversations during hazardous driving conditions or situations. Let the person you are speaking with know you are dri
- 5 Do not take notes or look up phone numbers while driving. If you are reading an address book or business card, or writing a "t
- 6 Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to
- 7 Do not engage in stressful or emotional conversations that may be distracting. Stressful or emotional conversations and drivin
- 8 Use your wireless phone to call for help. Your wireless phone is one of the greatest tools you can own to protect yourself and
- 9 Use your wireless phone to help others in emergencies. Your wireless phone provides you a perfect opportunity to be a "Good Sa
- 10 Call roadside assistance or a special wireless non-emergency assistance number when necessary. Certain situations you encount
- A Guide to Safe and Responsible Wireless Phone Use
- Appendix B Message from the FDA
Powered by helpdoc.net