Nokia 3360
Nokia 3360 -
Off 4-2-3-2
Nokia 3360
User Guide
Appendix B Message from the FDA
Nokia 3360
>
User Guide
>
4 Review the basics
>
. Shortcuts
>
4 SETTINGS
>
Call settings 4-2
>
Current call timer 4-2-3
>
Off 4-2-3-2
Nokia 3360 -
Off 4-2-3-2
Nokia 3360 > Off 4-2-3-2
Nokia 3360
User Guide
Notes
Where to get information
Legal InfoRmation
Export Controls
FCC/Industry Canada Notice
Contents
1 Safety first
ROAD SAFETY COMES FIRST
INTERFERENCE
SWITCH OFF IN HOSPITALS
SWITCH OFF IN AIRCRAFT
SWITCH OFF WHEN REFUELING
SWITCH OFF NEAR BLASTING
USE SENSIBLY
QUALIFIED SERVICE
ACCESSORIES AND BATTERIES
WATER-RESISTANCE
CONNECTING TO OTHER DEVICES
CALLING
EMERGENCY CALLS
2 Welcome
. Get the most out of this guide
Understand the terms
Notice text conventions
Follow graphic clues
Look for updates
. Understand wireless network services
Sign up with a service provider
. Register your phone
. E-newsletters
Note differences among service providers
. Learn about accessibility solutions
Alternate format user guides
LPS-3 Mobile Inductive Loopset
How the Loopset works
Set up the TTY/TDD profile
1 Connect the TTY/TDD via cable to the HDA-9 adapter.
2 Plug the HDA-9 adapter into the connector on the bottom of your phone, as shown in the illustration.
3 Press Menu 4-4-4-1 (Settings > Accessory settings > TTY/TDD > Use TTY).
4 Scroll to Yes, then press Select.
notes about TTY/TDD calls
make a TTY/TDD call
1 From the Start screen, enter the number and press .
2 When the receiving party answers, begin typing your conversation on the TTY/TDD.
Receive a TTY/TDD call
1 Make sure the TTY/TDD device is connected to your phone.
2 Press to answer the call, then type your responses on the TTY/TDD.
end a TTY/TDD call
Accessible features
. Your phone’s label
. Contact Nokia
. Contact your service provider
3 Set up your phone
. Install the battery
1 Push in the release button on the back of the phone (1), slide the cover toward the top of the phone (2 and 3), remove the cover.
2 Place the battery in the compartment with the label side facing up and the golden contact area aligned with the contact prongs.
3 Slide the battery into place and snap the top of the battery in so that the bar comes down snugly next to the battery.
4 Replace the cover (1) and slide it until you hear a click (2).
. Charge the battery
1 Connect the charger to an AC wall outlet.
2 With your phone on or off, connect the lead from the charger to the bottom of the phone.
3 Disconnect the charger from the phone and AC outlet when the battery is fully charged.
. Remove the battery
1 Remove the back cover of the phone.
2 Look for the battery latch that runs along the end of the battery nearest the top of the phone.
3 With your thumbs, push the latch away from the battery until the latch snaps and the battery lifts slightly.
4 Take out the battery.
. Important battery information
. Prolong battery life
. Switch on your phone
. Set up your headset
Connect the headset
1 Plug the headset jack into the bottom of your phone.
2 Put the round ear plug into one ear.
Use the headset
. Use the carrying case
. Adjust the volume
. Adjust screen contrast
1 Press Menu 4-3-5 (Menu > Settings > Phone settings > Display contrast).
2 Press to increase the contrast, and to decrease it.
3 Press OK to confirm your changes, or press Back to leave the contrast at its current level.
4 Review the basics
. Your Nokia 3360 phone
. About the antenna
. Memory use
. Learn the keys
. Make and answer calls
1 Hold the phone as you would any other telephone, with the earpiece over your ear and the microphone near your mouth, or connect and use the headset.
2 Press number keys to enter a number, including area code if needed.
3 Press .
. Check the Start screen
Return to the Start screen
In the Start screen
Check the menu number and scroll bar
. Review phone symbols
. Use the selection keys
. Check in-phone help
1 Scroll to a menu or submenu option.
2 Wait about 10 seconds.
3 Use to scroll down through the longer descriptions.
. Browse phone menus
Scroll through menus
1 At the Start screen, press Menu, then scroll through the menus using the and keys.
2 Select Options, Select, or OK by pressing the selection key for the option you want.
3 Use the scroll and selection keys to navigate the submenus; press to return to the Start screen.
Use a shortcut
1 Press Menu.
2 Within 3 seconds, enter the first number of the menu function you want to access. Repeat until you have entered all the numbers.
Tips
. Shortcuts
1 Messages
Write e-mail 01-2
Chat 01-3
Inbox 01-4
Outbox 01-5
Archive 01-6
Templates 01-7
Erase all 01-8
Voice messages 01-9
Voice mailbox number 01-9-2
2 Call Log
Received calls 2-2
Dialed calls 2-3
Clear call lists 2-4
Missed 2-4-2
Received 2-4-3
Dialed 2-4-4
Call timers 2-5
Duration of dialed calls 2-5-2
Duration of received calls 2-5-3
Duration of all calls 2-5-4
Life timer 2-5-5
Clear timers 2-5-6
3 PRofiles
Customize 3-1-2
Ringing options 3-1-2-1
Ringing tone 3-1-2-2
Ringing volume 3-1-2-3
Vibrating alert 3-1-2-4
Message alert tone 3-1-2-5
Keypad tones 3-1-2-6
Warning tones 3-1-2-7
Profile name (not available with
Normal profile)
Silent 3-2
Meeting 3-3
Outdoor 3-4
Pager 3-5
4 SETTINGS
Clock 4-1-2
Show/Hide clock 4-1-2-1
Set the time 4-1-2-2
Time format 4-1-2-3
Auto update of date and time 4-1-3
On 4-1-3-1
Confirm first 4-1-3-2
Off 4-1-3-3
Call settings 4-2
On 4-2-1-1
Off 4-2-1-2
Calling card 4-2-2
Current call timer 4-2-3
On 4-2-3-1
Off 4-2-3-2
Phone settings 4-3
Touch tones 4-3-2
Manual touch tones 4-3-2-1
Touch tone length 4-3-2-2
Welcome note 4-3-3
Help texts 4-3-4
On 4-3-4-1
Off 4-3-4-2
Display contrast 4-3-5
Restore factory settings 4-3-6
Accessory settings 4-4
Profile in use with accessory 4-4-1-1
Automatic answer 4-4-1-2
Handsfree 4-4-2
Profile in use with accessory 4-4-2-1
Automatic answer 4-4-2-2
Lights 4-4-2-3
Loopset 4-4-3
Use Loopset 4-4-3-1
Profile in use with accessory 4-4-3-2
Automatic answer 4-4-3-3
TTY/TDD 4-4-4
Security settings 4-5
Restrict outgoing calls 4-5-1-1
Restrict incoming calls 4-5-1-2
Access codes 4-5-2
Change security code 4-5-2-1
Network services 4-6
On 4-6-1-1
Off 4-6-1-2
Call forwarding 4-6-3
Send own caller ID 4-6-5
5 System
Manual 5-2
New search 5-3
6 gAMES
7 CalculatoR
8 Reminders
9 Infrared
10 Services
11 Prepaid
Add money to account 11-2
Save access phone numbers 11-3
. Phone book menu
Erase all
Name only
Name+number
Memory status
5 Add information
. About entering letters and numbers
. ABC and 123 methods
Enter letters
1 Find the key with the letter you want to enter.
2 Press the key repeatedly until the letter appears on the screen.
3 Wait for the blinking cursor to reappear before you enter another letter, unless the letter is on a different key.
Enter numbers
Enter punctuation and other characters
Enter spaces and punctuation
Erase mistakes
Change letter case
Use special characters in names and phone numbers
In Abc
1 Press .
2 Use and to move to the character you want, then press Insert.
In 123
. Write with predictive text
Keys and tools for predictive text
Turn on predictive text input
1 Press Menu, then press Select.
2 When Write message appears, press Select.
3 Press Options, scroll to Predictive text and press Select.
4 Scroll to the language you want (for example, English).
5 Press Select.
Turn off predictive text input
1 Repeat steps 1 through 5 in the section immediately above.
2 Scroll to T9 prediction off and press Select.
Tips for predictive text
Insert a symbol
1 Press and hold.
2 Scroll to the symbol you want and press Insert.
Check a word
Add a word to the predictive text dictionary
1 Press Spell and enter the word(s) using standard text entry.
2 Press Save to save the word(s).
Insert numbers
1 To add a number to the message, press and hold until appears on the screen.
2 Enter the numbers you want, then press and hold to return to the method.
Write compound words
1 Write the first part of the word and press to accept that part.
2 Write the last part of the compound word and press to enter the word.
6 Store names and numbers
. Open the phone book
. Save names and numbers
Quickly save a number and name
1 Enter the phone number using the keypad.
2 Press Options, then select Save.
3 Enter a name and press OK.
4 Press Done to return to the Start screen.
Save an entry using the names menu
1 Press Names to enter the phone book.
2 Scroll to Add entry and press Select.
3 Enter a name and press OK.
4 Enter a number and press OK.
5 Press Done to return to the Start screen.
. Save a text entry with a name
1 Find the name to which you want to add text.
2 Press Details, then press Options.
3 Scroll to Add text, then press Select.
4 Scroll to the text type you would like to add (E-mail, Street addr., or Note), then press Select.
5 Enter the text, and press OK.
6 Press to return to the Start screen.
. Recall information
Recall numbers from the phone book
1 At the Start screen, press Names.
2 Select Find and enter the name you need.
3 Press Find, then press .
Recall information with shortcuts
. Use phone book menus
Change phone book views
1 Press Names.
2 Scroll to Options and press Select.
3 At Phone book view, press Select.
4 Scroll to the view you want and press Select.
. Edit a name or number
1 Recall the name or number you wish to edit.
2 Press Details, then press Options.
3 Scroll to Edit number or Edit name and press Select.
4 Edit the name or number and press OK.
. Erase stored names and numbers
1 Recall the phone book entry you want to erase.
2 Press Details, then press Options.
3 Scroll to Erase, and press Select.
4 Press OK.
1 Press Names, scroll to Erase, and press Select.
2 Scroll to One by one and press Select.
3 Scroll to the entry you want to delete and press Erase.
4 When the message Erase all details? appears, press OK.
. Erase the entire phone book
1 Press Names, scroll to Erase, and press Select.
2 Scroll to Erase all and press Select.
3 When you see the message Are you sure?, press OK.
4 Enter your security code and press OK.
. Add a second number to a name
From the phone book
1 Press Names, scroll to Add number, and press Select.
2 Scroll to the name where you will add the number and press Add no.
3 Scroll to the type of number you are adding (General, Mobile, Home, Work or Fax), and press Select.
4 Enter the number and press OK.
From the Start screen
1 Enter the phone number using the keypad.
2 Press Options.
3 Scroll to Add to name and press Select.
4 Scroll to the name to which you want to add the number and press Add no.
5 Scroll to the desired number type and press Select.
By recalling the name
1 Recall the name to which you would like to add a second number.
2 Press Details, then press Options.
3 Scroll to Add number, then press Select.
4 Scroll to the desired number type and press Select.
5 Enter the number and press OK.
Change the number type
1 Recall the name from the phone book.
2 Press Details, then scroll to the number you want to change.
3 Press Options, scroll to Change type, and press Select.
4 Scroll to the number type you would like and press Select.
Specify a primary number
1 Recall the name for which you want to select a primary number.
2 Press Details, then scroll to the number you want to set as the primary number.
3 Press Options, scroll to As primary no., and press Select.
. Check memory status
1 Press Names and scroll to Options.
2 Press Select.
3 Scroll to Memory status and press Select.
7 Check call history
. Check missed, received, or dialed calls
1 Press Menu 2 (Menu > Call log) to go to the call log, then press Select.
2 Use and to move to Missed calls, Received calls, or Dialed calls.
3 Press Select at the submenu you want.
4 Use and to scroll to the number or name you want, then press Options.
5 Scroll to the option you want, then press Select.
Missed calls
Dialed calls, received calls
. Clear call lists
1 Press Menu 2-4 (Menu > Call log > Clear call lists).
2 Use or to scroll through the options list.
3 Stop at the appropriate option and press Select.
. Check call timers
1 Press Menu 2-5 (Menu > Call log > Call timers).
2 Use or to scroll through the following options:
. Turn on a current call timer
1 Press Menu 4-2-3 (Menu > Settings > Call settings > Current call timer).
2 Scroll to On and press Select.
3 After a call has ended, press any key on your phone to clear the current call time from the screen.
. Clear call timers
1 Press Menu 2-5-6 (Menu > Call log > Call timers > Clear timers).
2 Enter your security code and press OK.
8 Use advanced calling features
. Set in-call options
1 To access an option during a call, press Options.
2 Choose from the following options.
. Use call waiting
Store the call waiting feature code
1 Press Menu 4-6-2 (Menu > Settings > Network services > Network feature setting).
2 Enter the feature code your service provider gave you and press OK.
3 Scroll to Call waiting and press Select.
4 Make sure that Activate is highlighted and press Select.
Activate call waiting
1 Press Menu 4-6-4-1 (Menu > Settings > Network services > Call waiting > Activate).
2 Press Select.
Manage calls
Make a conference call
1 While in a call, you can either dial the number you want to conference in and press .
2 When the third party answers, press to connect all three parties.
3 To place one of the parties on hold, press again.
4 To drop all parties, press .
Look up a number during a conference call
1 During the call, press Options.
2 Scroll to Names and press Select.
3 Press Select at Find.
4 Enter a name and press Find, or scroll through the phone book.
5 Press Details.
. Use call forwarding
Learn about call forwarding feature codes
Store the call forwarding feature code
1 Press Menu 4-6-2 (Menu > Settings > Network services > Network feature setting). The Feature code box appears.
2 Enter the feature code your service provider gave you, then press OK.
3 Use or to scroll to Call forwarding and press Select.
4 Scroll to the type of forwarding that matches the feature code you entered, then press Select.
5 Make sure that Activate is highlighted and press Select.
Activate/cancel call forwarding
1 Press Menu 4-6-3 (Menu > Settings > Network services > Call forwarding).
2 Scroll to the desired call forwarding option, then press Select.
3 Highlight Activate and press Select.
4 In the Number box, either enter the number to which you want your calls forwarded (or press Find to recall a number from the phone book).
5 Press OK.
. Redial automatically
activate automatic redial
1 Press Menu 4-2-1 (Menu > Settings > Call settings > Automatic redial).
2 Scroll to On and press Select.
. Use a calling card
Save calling card information (step 1)
1 Press Menu 4-2-2 (Menu > Settings > Call settings > Calling card).
2 Enter your security code and press OK.
3 Scroll to card A, B, C or D and press Options.
4 Scroll to Edit and press OK. At Dialing sequence, press Select.
5 Use or to scroll through the list of dialing sequences, as described in the following list.
6 Press Select.
Save calling card information (step 2)
1 When prompted for the calling card’s access number, enter the number and press OK. This number is usually the 1-800 number that is listed on the calling card.
2 When prompted to enter a calling card number and PIN number, enter the number, and press OK. Press OK again when the Save changes? message appears.
3 Use or to scroll to Card name, press Select, and enter the card name using your phone’s keypad.
4 Press OK.
Choose a calling card to use
1 Press Menu 4-2-2 (Menu > Settings > Call settings > Calling card).
2 Enter your security code and press OK.
3 Scroll to the desired card and press Options.
4 Scroll to Select and press OK.
Make a calling card call
1 Enter the phone number, including any prefix (such as 0 or 1) that may be needed.
2 Press and hold until your phone displays the message Card call and then Wait for tone, then press OK.
3 When you hear the tone from your calling card service, press OK.
4 After the tone, your phone displays the message Wait for tone, press OK again. Press OK.
. Send your own number in caller ID
Store the feature code
1 Press Menu 4-6-2 (Menu > Settings > Network services > Network feature setting).
2 Enter the feature code your service provider gave you and press OK.
3 Use or to scroll to Send own caller ID and press Select.
4 Highlight Yes and press Select.
Set the send own number feature
1 Press Menu 4-6-2-3 (Menu > Settings > Network services > Network feature setting > Send own caller ID).
2 Scroll to Yes (to show your number) or No (not to show it).
3 Press Select.
4 Enter the number you wish to call (or press Find to retrieve the number from the phone book), and press OK.
. Select a phone number
Select the phone number
1 Press Menu 4-7 (Menu > Settings > Own number selection).
2 Scroll to the phone number you want to use and press Select.
. Set touch tones
Set manual touch tones
1 Press Menu 4-3-2-1 (Menu > Settings > Phone settings > Touch tones > Manual touch tones).
2 Select one of the following options, then press Select:
Set touch tone length
1 Press Menu 4-3-2-2 (Menu > Settings > Phone settings > Touch tones > Touch tone length).
2 Use or to scroll to Short or Long. Short sets the tone length to 0.1 second. Long sets the tone length to 0.5 second.
3 Press Select.
Store touch tone sequences (strings)
Store touch tone strings with phone numbers
1 Enter the phone number that you want associated with a touch tone.
2 Press w or p where needed.
3 Enter the touch tone string.
4 Store the number as you normally would.
Send a touch tone string
1 Press Menu 4-3-2-1 (Menu > Settings > Phone settings > Touch tones > Manual touch tones).
2 Make sure that the setting is not set to Off.
3 Then, during your call, press Options, scroll to Touch tones and press Select.
4 Enter the touch tone string or recall the string from the phone book, and press Tones.
9 Use voice mail
. Check for messages
. Set up your voice mailbox
1 Press Menu 01-9-2 (Menu > Messages > Voice messages > Voice mailbox number).
2 Enter your voice mailbox phone number.
3 Press OK.
. Set greetings
. Listen to your voice messages
1 When your phone alerts you to new voice messages, press Listen and follow the instructions given on the phone.
2 If you’d rather listen to your messages later, press Exit.
3 To listen to your voice messages:
10 Personalize rings and tones
. What is a profile?
. Select a different profile
1 Quickly press the Power key.
2 Use and to move to the profile you want to use.
3 Press Select to select a profile.
. Customize a profile
1 Press Menu 3 (Menu > Profiles).
2 Scroll to the desired profile in the list and press Select.
3 Select Customize to view the options for the selected profile.
Set ringing options
1 Press Menu 3 (Menu > Profiles).
2 Use or to scroll to the desired profile in the list for which you want to set the ringing options, and press Select.
3 Scroll to Customize and press Select.
4 Scroll to Ringing options and press Select.
5 Scroll to one of the ringing options, as described below, and press Select.
Set the ringing tone
1 Press Menu 3 (Menu > Profiles). Your phone lists each profile.
2 Use or to scroll to the profile for which you want to set the ringing tone.
3 Press Select.
4 Scroll to Customize and press Select.
5 Scroll to Ringing tone and press Select.
6 Scroll through the options, and when you hear the tone you want to use, press Select.
Set the ringing volume
1 Press Menu 3 (Menu > Profiles).
2 Use or to scroll to the profile you will set, and press Select.
3 Highlight Customize and press Select.
4 Scroll to Ringing volume and press Select.
5 Scroll through the options. When you hear the right volume level, press Select.
Set a vibrating alert
1 Press Menu 3 (Menu > Profiles).
2 Use or to scroll to the profile for which you want to change the vibrating alert, and press Select.
3 Select Customize and press Select.
4 Scroll to Vibrating alert and press Select.
5 Use or to scroll to On or Off and press Select.
Set the message alert tone
1 Press Menu 3 (Menu > Profiles).
2 Use or to scroll to the profile for which you want to set the message alert tone, and press Select.
3 Select Customize and press Select.
4 Scroll to Message alert tone, then press Select.
5 Use or to scroll through your choices.
6 When you find the tone you want, press Select.
Set keypad tones
1 Press Menu 3 (Menu > Profiles).
2 Use or to scroll to the profile for which you want to set the keypad tones, and press Select.
3 Select Customize and press Select.
4 Scroll to Keypad tones and press Select.
5 Use or to scroll to one of the levels and press Select. If you choose Off, no keypad tones are heard.
Set warning tones
1 Press Menu 3 (Menu > Profiles).
2 Use or to scroll to the profile for which you want to set the warning tones, and press Select.
3 Select Customize and press Select.
4 Scroll to Warning tones, then press Select.
5 Scroll to On and press Select.
. Rename profiles
1 Press Menu 3 (Menu > Profiles).
2 Use or to scroll to the desired profile and press Select.
3 Select Customize, scroll to Profile name and press Select.
4 Enter the new name and press OK.
11 Personalize phone settings
. Set the language
1 Press Menu 4-3-1 (Menu > Settings > Phone settings > Language).
2 Use or to scroll to the language you want to use and press Select.
. Set and display the clock
Set the clock
1 Press Menu 4-1-2 (Menu > Settings > Time settings > Clock).
2 Use or to scroll to Set the time and press Select.
3 Enter the time using a 00:00 format and press OK. For example, to set your clock to 9:30, enter 09:30. If you set the time format for 24-hour time, enter the number the same way: 09:30 or 21:30.
Show the clock on the Start screen
1 Press Menu 4-1-2 (Menu > Settings > Time settings > Clock).
2 To show the clock, scroll to Show clock and press Select.
Select the time format
1 Press Menu 4-1-2 (Menu > Settings > Time settings > Clock).
2 Use or to scroll to Time format and press Select.
3 Use or to scroll to either am/pm or 24-hour and press Select.
. Set the clock to be updated by the network
Turn on the network date and time update
1 Press Menu 4-1-3 (Menu > Settings > Time settings > Auto update of date and time), then press Select.
2 Scroll to On or Confirm first, then press Select.
Turn off the network date and time update
1 Press Menu 4-1-3 (Menu > Settings > Time settings > Auto update of date and time), then press Select.
2 Scroll to Off, then press Select.
. Add a welcome note
1 Press Menu 4-3-3 (Menu > Settings > Phone settings > Welcome note).
2 Enter the text of the welcome note.
3 Press Options.
4 Scroll to Save and press Select.
. Use speed dialing
Set up a speed-dial key
1 Press Names and scroll to 1-touch dialing.
2 Press Select.
3 Use or to scroll to the first number that includes the message (empty) and press Assign.
4 Use or to scroll to the name and number to which you want to assign this key and press Select.
5 To call a number using speed dialing, press and hold the appropriate key for a few seconds.
Change speed dialing numbers
1 Press Names, scroll to 1-touch dialing, and press Select.
2 Scroll to the key you want to change and press Options.
3 Scroll to Change and press Select.
4 Enter the new number or recall a number from the phone book.
5 When you’ve entered the number, press OK.
Erase speed dialing numbers
1 Press Names.
2 Use or to scroll to 1-touch dialing and press Select.
3 Scroll to the key you want to erase and press Options.
4 Scroll to Erase and press Select.
5 Press OK.
. Set your phone to answer automatically
1 Press Menu 4-4-1-2 (Menu > Settings > Accessory settings > Headset > Automatic answer).
2 Press Select.
3 Use or to scroll to either On or Off and press Select.
. Set the lights (car kit only)
1 Press Menu 4-4-2-3 (Menu > Settings > Accessory settings > Handsfree > Lights).
2 Scroll through your choices in the list below, and press Select.
. Restore the factory settings
1 Press Menu 4-3-6 (Menu > Settings > Phone settings > Restore factory settings).
2 Enter your security code and press OK.
12 Manage phone security
Tips
. Change your security code
1 Press Menu 4-5-2-1 (Menu > Settings > Security settings > Access codes > Change security code). The Security code box appears.
2 Enter the default security code and press OK.
3 At the message Enter new security code, enter your new security code and press OK.
4 At the message Verify new security code, enter your new security code again and press OK. The message Security code changed appears.
. Lock the keypad
Activate Keyguard
Deactivate Keyguard
Answer a call while Keyguard is active
. Restrict calls
Add a number to the call restriction list
1 Press Menu 4-5-1 (Menu > Settings > Security settings > Call restrictions).
2 Press Select, enter your security code, and press OK.
3 Scroll to Restrict outgoing calls or Restrict incoming calls, then press Select.
4 Scroll to Add restriction, then press Select.
5 Enter the number you want to restrict, or recall the number from the phone book, then press OK.
6 Enter a name for the restriction, then press OK. If you press OK without entering a name, the number will be used.
Restrict outgoing calls
1 Press Menu 4-5-1 (Menu > Settings > Security settings > Call restrictions).
2 Press Select, enter your security code, and press OK.
3 Scroll to Restrict outgoing calls and press Select.
4 Scroll to Select to choose from your list of call restrictions.
5 Scroll to the restriction you want to activate and press Mark.
6 Press Done. The message Save changes? appears. Press Yes.
Restrict incoming calls
1 Press Menu 4-5-1 (Menu > Settings > Security settings > Call restrictions).
2 Press Select, enter your security code, and press OK.
3 Scroll to Restrict incoming calls, then press Select.
4 Scroll to Select and press Select to choose from your list of call restrictions.
5 Scroll to the restriction you want to activate and press Mark.
6 Press Done. The message Save changes? appears. Press Yes.
Turn off call restrictions
13 Manage reminders and notes
. Add a reminder
1 Press Menu 8 (Menu > Reminders), then press Options.
2 Scroll to Add reminder and press Select.
3 Enter the subject for the reminder and press Options. The following options are available:
4 Highlight Save and press Select.
5 Enter the date and press OK, then enter the time and press OK.
6 Next, you have the option to set an alarm for your reminder.
. Add a note
1 Press Menu 8 (Menu > Reminders). Press Options, scroll to Add note, then press Select.
2 Enter the note, then press Options.
3 Scroll to Save, then press Select.
. Send and receive a reminder or note
Send a reminder or note
1 Press Menu, scroll to Reminders, and press Select.
2 Scroll through your list of reminders and notes, highlight the one you want to send, and press Options.
3 Scroll to Send, then press Select.
4 Select the method you would like to use, then follow the phone’s prompts to send the reminder or note.
Receive a reminder or note
1 The message Reminder received appears when someone sends you a reminder or note.
2 Press Show to view the note.
3 Press Options to view the available reminder or note options.
4 Press Select when you have highlighted the option you want.
. Choose other reminder and note options
14 Use prepaid services
. Manage prepaid service
Activate prepaid
Deactivate prepaid
Use the menu
. Save your access numbers
1 Press Menu 11-3 (Menu > Prepaid > Save access phone numbers).
2 At Save access phone numbers, press Select.
3 Scroll to Replenish phone number, press Select, enter the access number from your service provider, and press OK.
4 Scroll to Balance phone number, enter the balance number from your service provider, and press OK.
. Add money to your account
1 Press Menu 11-2 (Menu > Prepaid > Add money to account).
2 At Card number, enter your prepaid card number and press OK.
3 When you see the message Listen for prompt then press OK, press OK.
4 When you see the message Wait for prompt, then press End, press End call.
. Check your prepaid balance
Check the prepaid balance
1 Press Menu 11-1 (Menu > Prepaid > Check account balance).
2 At Check account balance, press Select.
3 Press to terminate the call.
15 Set network services features
. Set up how your phone selects a network
Search for a network
. Use your phone while traveling
16 Communicate with text messages
. About text messages
. Use folders for text messages
Text message capacity
. Write and send a text message
1 Press Menu, select Messages, then select Write message.
2 Enter a message of up to 160 characters.
3 When you’ve finished writing, press Options, scroll to Send, then press Select.
4 Enter or recall the recipient’s phone number, then press OK.
Options when writing a text message
. Resend a message from the outbox
1 Scroll to the message, then press Select.
2 Press Options.
3 Scroll to Send, and press Select.
4 Enter the number to which you want to send the message. You will have the option of finding one of your stored numbers. Once the number has been entered, press OK.
. Receive a text message
. Read a text message
1 Press Show.
2 Press Options for a list of choices you have while reading the message (see the list at the end of this section).
3 Press Select when the option you want is highlighted.
options for a message
. Save a message in the archive folder
Save a message
1 Highlight the message you wish to save and press Select.
2 Press Options.
3 Scroll to Save, then press Select.
. When your phone’s memory is full
. Erase messages
Erase a message
1 While reading a message, press Options.
2 Scroll to Erase, then press Select.
3 Press OK.
Erase messages from folders
1 Press Menu 01-8 (Menu > Messages > Erase all). You will have the following options: All read, Inbox, Outbox, and Archive.
2 Scroll to the folder that you want to empty all messages from and press Select.
3 Enter your security code and press OK.
. Reply to a message
1 While reading a message, press Options.
2 Scroll to Reply, press Select, and choose one of the following reply options:
3 Edit your reply, then press Options.
4 Scroll to Send, then press Select.
5 Edit the number if needed, then press OK.
. Forward a message
1 While reading a message in the inbox, press Options.
2 Scroll to Forward, press Select, and choose whether your message should be sent as a text message or as e-mail.
3 Press Options, or edit the message and press Options.
4 Scroll to Send, then press Select.
5 Enter or recall the recipient’s phone number, then press OK.
. Send and receive e-mail messages
Send an e-mail message
1 Press Menu 01-2 (Menu > Messages > Write e-mail).
2 Press Select.
3 Enter the e-mail address, then press OK.
4 Enter a subject and press OK.
5 When the message screen appears, enter your message.
6 When you’ve finished the message, press Options, select Send e-mail, and press Select.
Reply to or forward an e-mail message
1 If the message is not on the screen, press Menu 01-4 (Menu > Message > Inbox).
2 Select the message you received and press Select.
3 Press Options, scroll to Forward or Reply, and press Select.
4 Scroll to As e-mail and press Select.
5 Select the format.
6 Follow steps 3 through 6 in “Send an e-mail message.”
Receive an e-mail message
. Use templates
Work with templates
1 Press Menu 01-7 (Menu > Messages > Templates) and press Select.
2 Scroll to the template you want and press Select.
3 Press Options to view the menu list:
4 Select the option you want and follow the phone’s prompts to complete your task.
Insert a template when writing a new message
1 Press Menu 01-1 (Menu > Messages > Write message).
2 Press Options, scroll to Use template, and press Select.
3 Scroll to the template you want and press Select.
4 Continue as you would when sending a new text message.
. Chat with other phone users
Start a chat session
1 Press Menu 01-3 (Menu > Messages > Chat), then press Select.
2 Enter the other party’s phone number or recall it from the phone book and press OK.
3 At My chat name: enter a name for the chat session and press OK.
4 Write your chat message, press Options, then press Send.
5 Press OK to clear the screen and reply to the message.
6 To view the previous message or edit your chat name, press Options and select Chat history or Chat name.
. Use picture messages
Notes about picture messages
Send picture messages
1 Press Menu, then Select.
2 Scroll to Templates, then press Select.
3 Scroll to the picture you want to send, and press Select.
4 Press Options, scroll to Send, then press Select.
5 Recall or enter the phone number of the recipient.
6 Press OK.
Attach a picture to a text message
1 Press Menu 01-1 (Menu > Messages > Write message).
2 Enter your message, then press Options.
3 Scroll to Attach picture, then press Select.
4 Scroll to the picture you want to send, then press View.
5 Press Use to attach the picture to your text message.
6 Press Options, then select Send.
7 Enter the phone number or recall a number from your phone book, then press OK.
Preview, change, or erase a picture message
1 After a picture has been attached to your text message, press Options at the message edit screen.
2 Scroll to one of the following options and press Select.
a) Preview - Previews the attached message before sending. Press Back to exit.
b) Change picture - Takes you back to the picture list. Scroll to highlight a new picture. Press View then press Use to link the new picture to your message.
c) Delete picture - Deletes the attached picture from your text message.
Receive picture messages
1 When your phone displays Message received, press Show and the message appears.
2 If the picture has a text message with it, scroll up or down to see the entire message.
Save the picture
1 While viewing a picture message, press Options.
2 Scroll to Save picture, then press Select.
3 Enter a title for the picture, then press OK.
17 Use special features
. Send and receive business cards
Send a business card
1 Find the name in your phone book and press Details.
2 Press Options, scroll to Send bus. card, then press Select.
3 Scroll to SMS and press Select. (SMS stands for short message service.)
4 Choose Primary no. or All details, then press Select. This step appears only if you have two numbers saved with the name or if you have a text entry.
5 Enter or recall the phone number to which you want to send the business card, and press OK.
View a received business card
1 When your phone shows Business card received, press Show.
2 Scroll through the available information.
Save a viewed business card
1 While viewing the business card, press Options.
2 Scroll to Save, then press Select.
Delete a viewed business card
. Download (transfer) ringing tones
Receive a ringing tone
1 Press Options.
2 Scroll to Playback and press Select.
Save a received ringing tone
1 If you want to save a ringing tone after you’ve listened to it, press Quit.
2 Scroll to Save tone, then press Select.
3 Choose the ringing tone you want to replace-either an empty personal placeholder, if any are remaining, or a tone you’ve downloaded previously.
4 Press Select.
Discard received ringing tones
. Set the alarm clock
Set the time
Set the alarm clock
1 Press Menu 4-1-1 (Menu > Settings > Time settings > Alarm clock).
2 Enter the time for the alarm and press OK.
3 Select either am or pm.
4 Press Select.
Turn off the alarm clock when it rings
Turn off the alarm clock altogether
1 Press Menu 4-1 (Menu > Settings > Time settings).
2 Press Select, scroll to Off, then press Select.
. Use the calculator
1 Press Menu 7 (Menu > Calculator).
2 Enter the first number in the calculation.
3 Based on the type of calculation that you need to perform, use one of the following actions:
4 Enter the second number in the calculation.
5 Press Options, use or to scroll to Equals, and press Select.
Convert currency
Set the exchange rate
1 Press Menu 7 (Menu > Calculator), then press Options.
2 Use or to scroll to Exchange rate and press Select.
3 Select the exchange rate: Foreign units converted to home units or Home units converted to foreign units.
4 Press Select.
5 Enter the appropriate number and press OK.
Calculate currency using the exchange rate
1 Press Menu 7 (Menu > Calculator).
2 Enter the number of units for the exchange rate.
3 Press Options and scroll to To home or To foreign.
4 Press Select.
18 Infrared
. Infrared basics
1 Make sure that the IR ports of the two devices are pointed at each other.
2 Press Menu 9 (Menu > Infrared), then press Select. You see the message IR reception activated, and the IR icon appears.
3 Have the user of the sending device select the desired IR function to start data transfer.
Check the status of an IR connection
. Send and receive information
Send a business card to another device
1 Recall the phone book entry you would like to send by IR.
2 Press twice (Details > Options).
3 Scroll to Send bus. card and press Select.
4 Point the two IR ports at each other.
5 Scroll to Via infrared, then press Select.
Receive a business card from another device
1 Point the two IR ports at each other.
2 Press Menu 9 (Menu > Infrared).
3 When you see the message Business card received, press Show.
4 Press Options to select Save or Discard, and press Select.
Reminders
Send a reminder note to another device
1 Scroll to the reminder you wish to send and press .
2 Scroll to Send, then press .
3 Point the infrared ports of each device at each other.
4 Scroll to Via IR and press to start data transfer.
. PC Connectivity
Nokia PC Suite™
Modem setup
Download software
19 Connect to the Wireless Internet
. Notes on Wireless Internet access
Technology background
The service provider’s role
. Set up for browsing
. Sign on to the Wireless Internet
1 At the Start screen, press Menu 10 (Menu > Services).
2 At the Services menu, press Select, then select Home.
. Use browser options (Services Menu)
. Sign off the Wireless Internet
. Navigate the Wireless Internet
Edit a data entry field
1 Scroll to highlight the data entry field, press Options, then select Edit.
2 Use the phone’s keypad to enter the text in the data entry field (for example, Miami), and press OK.
3 Scroll to the link you want (for example, Get forecast?) and press Options and select Open link.
Choose browser options (while connected)
. Use bookmarks
Save an address as a bookmark
1 Navigate to the site you want to bookmark and press Options.
2 Scroll to Add Bookmark and press Select.
Enter a bookmark manually
1 While browsing, press Options.
2 Scroll to Bookmarks and press Select.
3 Press Options, highlight New bookmark and press Select.
4 Enter the site’s address (example: my.yahoo.com) and press OK.
5 Enter a name for the new bookmark and press OK.
Return to a bookmarked site
1 While browsing, press Options.
2 Scroll to Bookmarks and press Select.
3 Scroll to the bookmark you want and press Options.
4 Scroll to Go to and press Select.
20 Play games
Start a new game
1 Press Menu 6-1 (Menu > Games > Select game).
2 Scroll to the desired game, and press Select.
Game settings
. Space Impact
. Pairs II
. Snake II
21 Frequently asked questions (FAQ)
22 Glossary
23 Reference information
. Battery statements
Charging and Discharging
. Use proper care and maintenance
. Understand important safety information
Traffic Safety
Operating environment
Electronic devices
Pacemakers
Hearing aids
Other medical devices
Vehicles
Posted facilities
Potentially explosive atmospheres
Vehicles
. Emergency calls
1 If the phone is not on, switch it on. Check for adequate signal strength.
2 Press as many times as needed (for example, to exit a call, to exit a menu, etc.) to clear the display and ready the phone for calls.
3 Key in the emergency number for your present location (for example, 911 or other official emergency number). Emergency numbers vary by location.
4 Press the key.
. Certification Information (SAR)
. Use accessories safely
A few practical rules for accessory operation:
. Batteries
Charging times
Standby and talk times
. Accessories
900 mAh NiMH Battery (BMC-3)
Rapid Travel Charger (ACP-8U)
Rapid Cigarette Lighter Charger (LCH-9)
Spare Battery Charger (DDC-1)
Desktop Charging Stand (DCV-10)
Headset (HDE-2)
Loopset (LPS-3)
Leather carry case (CSL-20)
TTY/TDD Adapter (HDA-9)
What you’ll need
Mobile Holder (MBC-6)
Express Car Kit (CARK-125)
Express Car Kit (PPH-1)
Nokia Xpress-on™ color covers
Remove the back cover
1 Switch off the power and disconnect the phone from the charger or any other device.
2 Push in the release button on the back of the phone (1), slide the cover toward the top of the phone (2 and 3), and remove it.
Remove the front cover
1 Use the finger rests on each side of the phone and hold the phone face down.
2 While holding the phone, place your finger on the grove between the phone and the cover.
3 Gently pry the front cover away from the phone and lift the phone out of the cover.
Remove the keypad
1 Lift the keypad from the inside of the front cover.
2 Place the keypad into the new front cover.
Replace the front cover
1 Slide the top of the phone into the top of the front cover. Be careful to align the power key/IR port with its place in the top of the front cover.
2 Gently push the bottom of the phone into the bottom of the front cover until it snaps into place.
Replace the back cover
1 Insert the two catches of the back cover in the corresponding slots in the phone.
2 Slide the cover towards the bottom of the phone until it locks into place.
. Technical information
. Troubleshooting
. Nokia ONE-YEAR LIMITED WARRANTY
1 The limited warranty for the Product extends for ONE (1) year beginning on the date of the purchase of the Product. This one year period is extended by each whole day that the Product is out of your possession for repair under this warranty.
2 The limited warranty extends only to the original purchaser (“Consumer”) of the Product and is not assignable or transferable to any subsequent purchaser/end-user.
3 The limited warranty extends only to Consumers who purchase the Product in the United States of America.
4 During the limited warranty period, Nokia will repair, or replace, at Nokia’s sole option, any defective parts, or any parts t
5 Upon request from Nokia, the Consumer must prove the date of the original purchase of the Product by a dated bill of sale or dated itemized receipt.
6 The Consumer shall bear the cost of shipping the Product to Nokia in Melbourne, Florida. Nokia shall bear the cost of shipping the Product back to the Consumer after the completion of service under this limited warranty.
7 The Consumer shall have no coverage or benefits under this limited warranty if any of the following conditions are applicable:
a) The Product has been subjected to abnormal use, abnormal conditions, improper storage, exposure to moisture or dampness, unau
b) The Product has been damaged from external causes such as collision with an object, or from fire, flooding, sand, dirt, winds
c) Nokia was not advised in writing by the Consumer of the alleged defect or malfunction of the Product within fourteen (14) days after the expiration of the applicable limited warranty period.
d) The Product serial number plate or the accessory data code has been removed, defaced or altered.
e) The defect or damage was caused by the defective function of the cellular system or by inadequate signal reception by the external antenna, or viruses or other software problems introduced into the Product.
8 Nokia does not warrant uninterrupted or error-free operation of the Product. If a problem develops during the limited warranty period, the Consumer shall take the following step-by-step procedure:
a) The Consumer shall return the Product to the place of purchase for repair or replacement processing.
b) If “a” is not convenient because of distance (more than 50 miles) or for other good cause, the Consumer shall ship the Product prepaid and insured to: Nokia Inc., Attn: Repair Department 795 West Nasa Blvd. Melbourne, FL 32901
c) The Consumer shall include a return address, daytime phone number and/or fax number, complete description of the problem, pro
d) The Consumer will be billed for any parts or labor charges not covered by this limited warranty. The Consumer will be responsible for any expenses related to reinstallation of the Product.
e) Nokia will repair the Product under the limited warranty within 30 days after receipt of the Product. If Nokia cannot perform
f) If the Product is returned during the limited warranty period, but the problem with the Product is not covered under the term
9 You (the Consumer) understand that the product may consist of refurbished equipment that contains used components, some of which have been reprocessed. The used components comply with Product performance and reliability specifications.
10 ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION OF THE
11 Some states do not allow limitation of how long an implied warranty lasts, so the one year warranty limitation may not apply
12 Nokia neither assumes nor authorizes any authorized service center or any other person or entity to assume for it any other o
13 This is the entire warranty between Nokia and the Consumer, and supersedes all prior and contemporaneous agreements or unders
14 This limited warranty allocates the risk of failure of the Product between the Consumer and Nokia. The allocation is recognized by the Consumer and is reflected in the purchase price.
15 Any action or lawsuit for breach of warranty must be commenced within eighteen (18) months following purchase of the Product.
16 Questions concerning this limited warranty may be directed to: Nokia Inc. Attn: Customer Service 7725 Woodland Center Blvd.,
17 The limited warranty period for Nokia supplied attachments and accessories is specifically defined within their own warranty cards and packaging.
Appendix A Message from the CTIA (Cellular Telecommunications & Internet Association) to all users of mobile phones.
A Guide to Safe and Responsible Wireless Phone Use
1 Get to know your wireless phone and its features such as speed dial and redial. Carefully read your instruction manual and lea
2 When available, use a hands free device. A number of hands free wireless phone accessories are readily available today. Whethe
3 Position your wireless phone within easy reach. Make sure you place your wireless phone within easy reach and where you can gr
4 Suspend conversations during hazardous driving conditions or situations. Let the person you are speaking with know you are dri
5 Do not take notes or look up phone numbers while driving. If you are reading an address book or business card, or writing a "t
6 Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to
7 Do not engage in stressful or emotional conversations that may be distracting. Stressful or emotional conversations and drivin
8 Use your wireless phone to call for help. Your wireless phone is one of the greatest tools you can own to protect yourself and
9 Use your wireless phone to help others in emergencies. Your wireless phone provides you a perfect opportunity to be a "Good Sa
10 Call roadside assistance or a special wireless non-emergency assistance number when necessary. Certain situations you encount
Appendix B Message from the FDA
(U.S. Food and Drug Administration) to all users of mobile phones.
Consumer Update on Wireless Phones
Index
A
B
C
D
E
F
G
H
I
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Nokia 3360
English
Español